Edward Creation Lift Chair Reviews: Is It Worth It?

I was on the hunt for a lift chair that wouldn’t break the bank but also wouldn’t break down in six months. That’s when I stumbled upon Edward Creation. You’ve probably seen them online and wondered, “Are these legit?” I pulled the trigger, and I’m here to tell you exactly what I found. If you’re in the market for reliable comfort and assistance without the hefty price tag, this is a brand you absolutely need to consider buying.

My Experience With The Edward Creation Lift Chair

The box was… intimidating. Let’s be honest. When you order furniture online, sight-unseen, there’s always that moment of panic. “Did I just buy a 200-pound mistake?” The Edward Creation chair arrived in a massive carton, and I’d recommend having a friend help you get it inside. Assembly, however, was surprisingly straightforward. I’m not exactly a handyman, but it was mostly a matter of sliding the backrest onto the base and connecting a few color-coded cables. No tools, just a bit of muscle.

My first sit-down was tentative. I was recovering from a minor knee procedure, and the simple act of getting up from my old, sinking sofa was agony. I settled into the soft-touch fabric. It was firm, but not “park bench” hard. It felt supportive, which is exactly what you need when your joints are complaining.

Then, the main event. I grabbed the simple, tethered remote. I pressed “UP.” There was a gentle, quiet hum from the motor. No sudden lurching, no grinding gears. It was smooth. The chair tilted forward, lifting me carefully until my feet were planted flat on the floor. I just… stood up. No hands on the armrests, no grunting, no pain shooting up my knee. I almost laughed, it was that easy.

Over the next two weeks, that chair became my command center. I napped in it (the recline was deep enough), I worked from it (with a lap desk), and I got in and out of it probably 50 times a day. The fabric held up, the motor never stuttered. It wasn’t a $3,000 medical-grade behemoth, but it was my reliable workhorse. That initial smoothness and quiet operation really defined my whole experience. It just worked.

Let’s talk about the features. Mine came with heat and massage. Now, let’s be realistic. This isn’t a high-end Shiatsu massager. It’s a vibration massage. But you know what? When my back was stiff from sitting, that gentle vibration combined with the lower-back heat was bliss. It was the perfect “wind down” feature before bed. The side pocket was also a lifesaver, constantly holding my remote, my phone, and a granola bar. It’s the little things that make a big difference during recovery, and this chair seemed to get all the little things right.

Pros Of The Edward Creation Lift Chair

Exceptional Value for Money: This is, without a doubt, the biggest selling point. When I was shopping, I saw chairs from “big box” medical brands that were two or even three times the price. The Edward Creation model gave me the lift, the recline, the heat, and the massage for a fraction of that cost. If you are on a budget but desperately need the assistance, this brand feels like a lifesaver. You aren’t paying for a fancy brand name; you’re paying for the function, and in this case, the function is excellent.
Surprisingly Simple Assembly: I mentioned this in my experience, but it deserves its own point. I dread the “flat-pack” furniture experience. This was not that. The chair typically comes in two main pieces (the back and the base). You literally slide the back onto the metal brackets on the base until it clicks, and then you connect the motor and remote cables. I had mine unboxed and operational in under 15 minutes. This is a huge plus if you’re alone, not particularly handy, or just want to use your new chair now.
Whisper-Quiet and Smooth Motor: My biggest fear was a jerky, loud motor that would make me feel like I was on some rickety amusement park ride. The motor in my Edward Creation chair is incredibly smooth. The transition from sitting to the “lifted” position is gradual and stable. You never feel off-balance. The low-decibel hum is reassuring, not disruptive. It’s perfect for a quiet living room where you might be watching TV or reading. It doesn’t announce to the whole house that you’re getting up.
Feature-Packed for the Price Point: I was just hoping for a chair that went up and down. What I got was a full-on comfort station. The lumbar heat is a fantastic addition, targeting that common ache-point in the lower back. It’s not scorching, but it’s a deep, penetrating warmth. The massage is a vibration system with multiple modes and intensity levels. Again, it’s not a deep-tissue massage, but it’s excellent for promoting circulation and just relaxing stiff muscles. Having cup holders and deep side pockets just seals the deal. It’s clear they thought about how people actually use these chairs—as a home base.
Comfortable and Supportive Padding: The chair strikes a great balance. It’s not a “sink-in” marshmallow, which is actually a good thing. For a lift chair, you need supportive foam that holds its shape and helps you get out. The padding in the seat, back, and armrests is dense and supportive. I’ve spent hours in it working on my laptop and hours napping, and it’s comfortable for both. The overstuffed headrest area is particularly nice. The fabric (on my model) was a soft, plush microfiber that felt warm and cozy, not sticky like some of the PU leathers.

Cons Of The Edward Creation Lift Chair

PU Leather Durability: I opted for the fabric, but many of the popular Edward Creation models use PU (polyurethane) leather. I’ve read several other user reviews, and this seems to be the most common complaint. While it looks sleek and is easy to wipe clean, PU leather is notorious for flaking and peeling over time, especially with heavy use or in a dry climate. If you have pets with claws or are planning to use this chair 24/7, the fabric option is likely the safer long-term bet.
Foam Compacting Over Time: While my chair is still new and supportive, the foam is not “high-density” medical-grade foam. I anticipate that after a year or two of heavy, daily use, the seat cushion will likely start to compact. This is a common trade-off with budget-friendly furniture. It’s comfortable now, but I don’t expect it to have the 10-year resilience of a top-tier brand. This is a “worth it for the price” item, not a “buy it for life” heirloom.
Slower Lift and Recline Speed: The “smooth and gradual” motor I love can also be seen as a con. It is not fast. If you are in a hurry, or if you’re used to a zippier mechanism, the leisureliness of the Edward Creation motor might test your patience. It’s designed for safety and stability, not speed. Getting from fully reclined to the standing lift position takes a solid 20-30 seconds.
Basic Remote Functionality: The remote gets the job done, but it’s not a high-tech masterpiece. On many models, you can’t, for example, control the footrest and the backrest independently (this is often called a “2-position” or “3-position” chair, not an “infinite position” chair). You press “recline,” and the whole chair moves into a set position. This lack of customization might be a deal-breaker for some who want to find that perfect “feet-up, back-straight” position for watching TV.
Standard Weight Capacity: Most of the standard Edward Creation chairs are rated for 300-330 pounds. This is perfectly fine for the average user, but it’s not a bariatric-friendly chair. If you are a larger individual and need a higher weight capacity (like 400-500 lbs), you will need to look elsewhere or specifically seek out a “heavy-duty” model, which this brand doesn’t seem to specialize in.

Maintenance Tips For The Edward Creation Lift Chair

Fabric Care: If you have the fabric model like I do, a vacuum with a brush attachment is your best friend. I vacuum mine weekly to get crumbs and dust out of the crevices. For spills, do not soak the fabric. Use a clean, dry cloth to blot immediately. Then, use a damp cloth with a tiny bit of mild soap (like diluted dish soap) and gently dab the spot. Blot it dry again. Always check the manufacturer’s tag for cleaning codes (like ‘W’ for water-based, ‘S’ for solvent-based). Mine was ‘W’, so water-based cleaning is safe.
PU Leather Care: If you went with the PU leather, your main enemies are dryness and sunlight. Keep the chair out of direct sunlight, as UV rays will accelerate cracking. Wipe it down weekly with a dry microfiber cloth. For cleaning, use a damp cloth. Avoid harsh cleaners, bleach, or ammonia-based products, as they will strip the material and cause it to become brittle. A specialized vinyl or PU conditioner, applied every few months, can help keep it flexible and prevent that dreaded peeling.
Check the Mechanism: About once every two months, I fully recline the chair and unplug it. I get a flashlight and just look at the metal lift mechanism underneath. I’m checking for built-up dust, pet hair, or any objects that might have fallen in (like a coin or a pen). Anything obstructing the scissor mechanism can strain the motor. I use a can of compressed air to blow out any dust I see. This simple check can prevent a lot of mechanical failures.
Listen to the Motor: You know what your chair should sound like. It’s your daily user. If you suddenly hear a new grinding, scraping, or clicking sound, stop using the chair immediately and inspect it. It could be something simple, like a cable getting caught, or it could be a sign of a failing motor. Don’t try to “push through” a bad sound. Unplug it and see if you can spot the obstruction. If not, contact customer service.
Cord and Remote Safety: This sounds basic, but it’s crucial. Never, ever run the power cord under the chair mechanism. When the chair reclines or lifts, it can pinch and sever the cord, creating a serious fire or shock hazard. I make sure my cord has a clear path to the wall outlet. I also try not to yank on the remote cord; I always grab the plug itself. The remote cord is often the first thing to fail from misuse.
Protect Against Power Surges: This is a powered piece of furniture with a motor and circuit boards (especially for the heat/massage). I have mine plugged into a quality surge protector, not just directly into the wall. A power spike during a thunderstorm could easily fry the electronics, and that’s an expensive, frustrating repair. It’s a $20 investment that protects the whole chair, and I highly recommend you do the same.

Also read: My Thoughts on Land Guard Raised Bed

Comparison With Other Brands

Price and Focus: This is the most obvious difference. Edward Creation is squarely in the “budget-friendly” category, while La-Z-Boy is a “premium comfort” brand. You’re paying for the La-Z-Boy name and their decades of reclining-comfort engineering.
Functionality: La-Z-Boy’s lift chairs are often more like traditional, plush recliners that also lift. They may have more luxurious fabrics and deeper, “sink-in” cushioning. The Edward Creation chair, in my opinion, feels more functional—it’s supportive and purpose-built for the lift feature first, and long-term comfort second.
Features: Surprisingly, Edward Creation often packs in more bonus features for the price, like the heat and massage. Many entry-level La-Z-Boy lift chairs are just that—a lift chair—and you have to pay significantly more for the “spa-like” extras.
Brand Background: This is a “lifestyle” brand versus a “medical equipment” brand. Pride Mobility is a leader in medical scooters and power chairs, and their lift chairs reflect that. They are built for durability, medical necessity, and long-term, heavy-duty use.
Durability and Warranty: Pride chairs generally have a more robust frame, higher-density foam, and more powerful motors. Their warranties are often much more comprehensive, especially on the frame and lift mechanism. Edward Creation is a furniture-grade item; Pride is a medical-grade item.
Positioning: Pride (and their sister brand, Golden) pioneered “infinite position” chairs. This means you can control the backrest and the footrest independently, which is crucial for people who need to alleviate pressure points or find a very specific position (like a “zero-gravity” recline). Most Edward Creation chairs are 2-position or 3-position, which is less customizable.
Customization: Golden Technologies is all about finding the perfect fit. They offer chairs in multiple sizes (Petite, Small, Medium, Large, Tall) to fit your exact height and weight. Edward Creation is typically a “one-size-fits-most” affair. If you are very tall or very short, you might find an Edward Creation chair uncomfortable, whereas Golden can fit you perfectly.
Luxury and Tech: Golden is the innovator. They have chairs with their patented “Twilight” technology (which adds an extra tilt for zero-gravity) and super-plush, high-end fabrics. They are the luxury car of the lift chair world.
Price: This comparison is no contest. A high-end Golden chair can easily cost four or five times as much as an Edward Creation chair. You are paying for that perfect fit, premium materials, and innovative technology. Edward Creation gives you the core function for a fraction of the cost.

Frequently Asked Questions (FAQ)

What is the best lift chair brand?

This really depends on your needs. In my research, I found that Pride Mobility and Golden Technologies are almost always at the top for medical-grade durability, reliability, and customization (like finding a chair for a specific height). La-Z-Boy is often called the best for pure, plush comfort, if you want a chair that feels more like a traditional recliner. However, for the best value—getting features like heat and massage for the lowest price—I found brands like Edward Creation to be the “best” in that specific category.

Does Medicare pay for lift chairs for seniors?

Yes, but it’s very specific. Medicare Part B (Medical Insurance) may cover the cost of the lifting mechanism only, not the chair itself (the fabric, cushions, frame, etc.). It’s classified as Durable Medical Equipment (DME). To qualify, you must have a prescription from your doctor stating that you have a medical necessity (like severe arthritis) and that you are unable to stand up from a regular chair, but you are able to walk once you are standing. You will still have to pay the 20% coinsurance on the mechanism and 100% of the cost for the “furniture” part of the chair.

What is the life expectancy of a lift chair?

From what I’ve gathered, a high-quality, medical-grade chair (like a Pride or Golden) can last anywhere from 5 to 10 years with proper care, though the upholstery might show wear sooner. For a budget-friendly chair like my Edward Creation, I am realistically expecting a solid 3 to 5 years of heavy, daily use before the foam starts to compact or the motor shows strain. If you only use it occasionally, it could last much longer.

Do physical therapists recommend lift chairs?

This is a point of debate. Some physical therapists do recommend them for patients post-surgery (like hip or knee replacement) or for those with conditions that make standing genuinely painful or dangerous, as it reduces the risk of a fall. However, other therapists worry that if you rely on the chair too much, the muscles you use to stand (your quads, glutes) will get weaker, making it harder to get up from other chairs. They recommend using the lift as a “helper” but still performing exercises to maintain your strength.

Conclusion

So, is the Edward Creation lift chair worth it? For me, the answer is a resounding yes. It delivered on its core promise: a safe, comfortable, and reliable lift, all without the sticker shock of the premium brands. It got me through my recovery and continues to be the most comfortable seat in my house. If you need the function of a lift chair with the bonus of comfort features, and you are working within a real-world budget, I genuinely believe you should buy one. It’s a fantastic value.